Automation for MI temperature sensor manufacturing
The Machines Factory (TMF) develops machines that automate the production of mineral insulated (MI) temperature sensors, one process step at a time. Our mission is not to sell standalone machines, but to build a complete automation ecosystem that reduces manual labour, improves process consistency, and increases operator productivity.
Rather than replacing an entire production line at once, we automate the biggest production bottlenecks step by step. Every machine is designed as a building block in one connected manufacturing workflow, creating a scalable and more efficient approach to MI sensor production.
CS-1100, for burr-free cutting of MI cable
The CS-1100 is a cutting and straightening machine designed specifically for MI cables, using specialised tools and techniques to deliver burr-free results with exceptional precision, while effortlessly processing even compact MgO-insulated cables.
WS-800, for cutting and straightening small-diameter wire
The WS-800 is an advanced wire cutting and straightening machine that precisely cuts a wide range of wire diameters, handles small-diameter solid wires with ease, and operates reliably in demanding industrial environments.
SC-1000, automated sorting for unattended MI cable production
It automatically sorts cut mineral insulated cable into separate trays according to the active production job, eliminating manual sorting and allowing multiple production orders to run consecutively without operator intervention.
LG-500, for MI cable stripping with precise laser grooving
The LG-500 Laser Grooving Unit introduces a completely new approach to MI cable stripping for manufacturers of thermocouples, RTDs and other mineral insulated cable assemblies.
{"version":1,"canvas_width":1200,"background_id":0,"background_url":"","machines":[{"id":"machine-249bbcd2-558f-4bad-9ded-79f57aa9eed5","name":"","height_cm":1100,"height_pct":78.5714,"image_id":2084,"image_url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Horizontal-spool-holder-TMF.webp","markers":[{"id":"marker-fb204735-1f6a-4b8c-b284-1ab06a6c712d","number":1,"x":62.6506,"y":12.3281,"title":"Horizontal spool holder","content":"\u003Cp\u003EThe horizontal spool holder requires no electrical power and can easily accommodate different coil sizes by adjusting the four black positioning pins on its flat, rotating platform. The CS-1100 automatically pulls the cable from the coil into the machine, allowing the spool holder to rotate freely without a motor.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Horizontal-spool-holder-1.mp4"}}]},{"id":"machine-4ba20b8c-5b6a-41bb-a331-827cb310079a","name":"SH-600","height_cm":1165,"height_pct":83.2143,"image_id":2087,"image_url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Vertical-spool-holder_TMF.webp","markers":[{"id":"marker-1bb39c24-9060-4319-a4eb-987feda8c691","number":2,"x":54.4383,"y":11.5962,"title":"Automatic spool holder","content":"\u003Cp\u003EThe SH-600 is an electrically driven spool holder designed for automatic and controlled feeding of MI cables into the CS-1100. It is particularly suitable for small-diameter MI cables.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Adding-spool-to-spool-holder.mp4"}},{"id":"marker-e1d605df-f638-4d20-b100-0f7c4367db6d","number":3,"x":62.5073,"y":46.3649,"title":"Connecting spool and CS-1100","content":"","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Guiding-spool-to-CS-1100-and-start.mp4"}},{"id":"marker-00de1f1a-d24b-451c-beb6-fd5cd27b27e4","number":4,"x":71.2385,"y":84.2015,"title":"Horizontal versus vertical","content":"\u003Cp\u003EThe SH-600 features a tensioning arm with a position sensor that automatically adjusts spool rotation to maintain consistent cable tension, preventing tangling and ensuring smooth, uninterrupted operation. \u003C\/p\u003E\n\u003Cp\u003EThe horizontal spool holder operates without electrical power, as the cable is pulled directly from the coil by the CS-1100 machine.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Horizontal-or-vertical-system.mp4"}}]},{"id":"machine-0cc7c6b3-16f2-4685-816c-bc4ad3687529","name":"CS-1100","height_cm":1400,"height_pct":100,"image_id":2085,"image_url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/CS-1100-and-sorting-carrousel-TMF.webp","markers":[{"id":"marker-477ecd96-1163-4ab3-866c-aa1adcac385b","number":5,"x":8.7035,"y":20.0538,"title":"Adjustable straightener offset","content":"\u003Cp\u003EThe CS-1100 features an adjustable straightener offset to achieve optimal cable straightness for different diameters. Smaller cables generally require more bending within the straightening system, while thicker cables require less. The offset can be quickly adjusted using a standard hex key (also known as an Allen key or Imbus key) and fine-tuned with a few test cuts, ensuring consistent and repeatable straightening results.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Offset.mp4"}},{"id":"marker-10472d26-7b96-495e-9017-60e6cc729a30","number":6,"x":16.2834,"y":21.7558,"title":"PTFE support and straightening bushings.","content":"\u003Cp\u003EThe CS-1100 can handle cable diameters from 1 to 8 mm using interchangeable PTFE bushings, which must be replaced when switching between different cable sizes.\u003C\/p\u003E\n\u003Cp\u003ETwo types are used: support bushings, which guide the cable through the machine, and straightener bushings, which are part of the straightening system.\u003C\/p\u003E\n\u003Cp\u003EFor larger cable diameters, the bushings are reinforced with stainless steel, combining the low-friction properties of PTFE with the strength needed to handle thicker cables without deformation.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/PTFE-support-straightening-bushing.mp4"}},{"id":"marker-391df234-451f-4640-869e-3bd0189e6f94","number":7,"x":26.7452,"y":21.7558,"title":"Initial cable feeding \u0026 setup","content":"\u003Cp\u003EBefore starting production, the operator manually guides the MI cable through the machine using the appropriate PTFE bushings.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Guiding-cable-and-clam.mp4"}},{"id":"marker-85c30a4c-b15c-4b41-8465-e3f796316b24","number":8,"x":35.1944,"y":11.3316,"title":"Cutting discs \u0026 dust extraction compartment","content":"\u003Cp\u003EThe CS-1100 offers two cutting disc options:\u003C\/p\u003E\n\u003Cp\u003EGreen Carborundum: Provides exceptionally clean cuts with minimal burr formation. Typical lifetime: 140\u2013180 cuts on \u00d83 mm MI cable.\u003C\/p\u003E\n\u003Cp\u003EWhite Alundum: Offers significantly longer tool life with slightly more burr formation. Typical lifetime: 400\u2013500 cuts on \u00d83 mm MI cable.\u003C\/p\u003E\n\u003Cp\u003EThe CS-1100 must be connected to a suitable vacuum cleaner, which plugs directly into the machine\u0027s integrated power socket. A protective cover is placed over the cutting disc, enclosing the cutting area and allowing dust and particles to be extracted efficiently. The vacuum automatically switches on during cutting, extracting MgO dust, sparks and fine metal particles at the source. This keeps the machine clean, reduces maintenance and protects internal components.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Cutting-disk-and-vacuum-compartment.mp4"}},{"id":"marker-31ded7bb-c112-4d9e-acd7-dce4366e625b","number":9,"x":29.3735,"y":3.4603,"title":"User-friendly touchscreen and queue","content":"\u003Cp\u003EThe interactive touchscreen displays real-time machine status, cutting lengths, measurements and the cutting queue, allowing operators to easily configure and monitor the production process.\u003C\/p\u003E\n\u003Cp\u003EThrough a communication cable, the cutting queue is automatically shared with the SC-1000 sorting carousel, ensuring the correct tray is selected for each cutting batch.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Touchscreen-en-queue.mp4"}},{"id":"marker-4c4972f9-1b33-488a-b4c5-4d637e1e30ea","number":10,"x":39.8224,"y":24.0959,"title":"Precision cutting with pneumatic clamping","content":"\u003Cp\u003EThe CS-1100 has a unique pneumatic clamping system that securely holds the MI cable in position during cutting, preventing movement and ensuring clean, straight and consistent cuts. Combined with the appropriate cutting disc, this minimises burr formation and reduces the need for additional finishing operations.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Pneumatic-clam.mp4"}},{"id":"marker-92f5a1a5-354c-45a6-821a-de1677190ede","number":11,"x":49.0954,"y":30.9035,"title":"Automatic job queue and sorting","content":"\u003Cp\u003EThe CS-1100 automatically processes different programmed cutting jobs, each with its own length and quantity. Once cut, the cables are automatically sorted by the SC-1000 into up to 10 separate trays, keeping cables of the same length neatly grouped together.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Automatic-cutting-and-collecting.mp4"}},{"id":"marker-a365eb06-28f8-4bd5-b414-d65e24120f73","number":12,"x":82.9494,"y":37.2856,"title":"Collecting cut lengths","content":"\u003Cp\u003EOnce production is complete, the trays of the sorting carousel can be opened to collect the cut MI cables, sorted by their programmed lengths.\u003C\/p\u003E\n\u003Cp\u003ETMF is also exploring the possibility of integrating desiccant beads into the trays to absorb moisture and reduce the risk of moisture ingress during temporary storage, keeping the MI cables as dry as possible before further processing.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/Emptying-trays-sorting-carousel.mp4"}},{"id":"marker-38e77e41-05a5-4481-899d-7a1a7e9854ac","number":13,"x":43.0323,"y":97.4904,"title":"One-time setup","content":"\u003Cp\u003EThe complete production line requires only a few basic connections: a standard electrical power supply, a vacuum cleaner for dust extraction, and a compressed air supply for the pneumatic clamping system. Once connected and configured, the machines are ready for operation.\u003C\/p\u003E\n","video":{"type":"local","url":"https:\/\/themachinesfactory.com\/wp-content\/uploads\/sites\/268\/2026\/11\/One-time-set-up.mp4"}}]}]}
Let’s chat to see if we can help you with your project needs
We value your interest and are always happy to answer any questions you may have. Whether you are a potential customer, a current client, or just interested in learning more about our machines, we encourage you to reach out to us using the button below. We look forward to hearing from you!